Predicting Lift and Drag With SOLIDWORKS and SIMULIA

Predicting Lift and Drag With SOLIDWORKS and SIMULIA

Drag forces due to air resistance are a key design factor for vehicles on the ground and in the sky. Current trends toward electrification have put even further emphasis on minimizing drag as a means to extend range or increase flight time when all other things are equal. This is relevant both for the designers of airframes and chassis, as well as suppliers of exterior-mounted third party equipment.

Performing predictions of lift and drag is a very straightforward process in SOLIDWORKS Flow Simulation and can be performed early on during design. This reduces the need for iterations of scale prototypes and wind tunnel tests and provides additional confidence in a design before committing to prototyping. Design variations can be quickly analyzed by cloning Flow Simulation projects between multiple SOLIDWORKS configurations.

Prototypes and wind tunnel tests with SOLIDWORKS SimulationPrototypes and wind tunnel tests with SOLIDWORKS Simulation

Evaluating competing designs in SOLIDWORKS Flow Simulation

Flight envelope characteristics can also be predicted by either or both of the following approaches:

  • Utilizing parametric studies to vary flow conditions or the orientation of geometry to perform studies iteratively
  • Varying flow conditions dynamically using dependencies inside a single transient analysis.

Parametric studies also allow rapid and automated iteration of potential design changes with the ability to link to SOLIDWORKS model dimensions and vary them over ranges.

SOLIDWORKS parametric studies allow rapid iterationsSOLIDWORKS parametric studies allow rapid iterations

Parametric Study batch iteration and optimization

Creating a refined mesh in SOLIDWORKS Flow Simulation is easy, taking advantage of various tools such as defining a level of refinement at the solid/fluid interface, utilizing equidistant local mesh to create “shells” of refinement around the object, or taking advantage of solution-adaptive meshing.

Solution-adaptive mesh in Flow Simulation used in a stall conditionSolution-adaptive mesh in Flow Simulation used in a stall condition

Solution-adaptive mesh in Flow Simulation used in a stall condition

For problems that require analysis of detailed turbulence as the result of wakes or vortex shedding, SIMULIA xFlow offers several advantages. Its Lattice-Boltzmann solver and highly dynamic adaptive refinement are able to capture turbulence in incredible detail.

SIMULIA xFlow analysis of flight maneuverSIMULIA xFlow analysis of flight maneuver

SIMULIA xFlow also features native support for body motion (both actively forced and reactive to the fluid flow) which allows for performing virtual flight or vehicle maneuvers and stability analysis – a longstanding limitation of SOLIDWORKS Flow Simulation and most “conventional” CFD packages.

See It In Action

Watch our recent webinar to see how these techniques and setup processes are discussed in-depth.


For more information on how SOLIDWORKS Simulation tools can fit your application, don't hesitate to contact us at Hawk Ridge Systems today. Thanks for reading!

July 13, 2022
Did you like this post?
0
0
Comments

Please to comment.

Don't have an account?