O0001(POSTED CODE)
( A HAWK RIDGE SYSTEMS POST PROCESSOR )
( -------WWW.HAWKRIDGESYS.COM-------- )
( SUPPORT@HAWKRIDGESYS.COM 877.266.4469 )
()
(POSTED DATE & TIME: 4-7-2020  - 13:52:25)

(NUM  TOOL TYPE   DIAM    RAD   H   D    DESCRIPTION) 
(---  ---------  ------  ----- --- ---   -----------) 
(T14  END MILL   0.3750 0.0000 H14 D14  3/8 EM CRB 2FL 1 LOC)
(T11  DRILL      0.2570 0.0000 H11 D11  F SCREW MACH DRILL)

(OPERATION NAME: CONTOUR MILL1)
(3/8 EM CRB 2FL 1 LOC)
(CUTTER COMP: ON - TOOL CENTER )
N5 G00 G17 G20 G40 G64 G80 G90 G94
N10 T14 T11 M06
N15 G00 G54 X.1832 Y1.6636 S4000 M03
N20 G43 H14 Z1. M08
N25 Z.1
N30 G05 P2
N35 G01 Z-.5 F8.
N40 G41 D14 X.0453 Y1.8015 F24.
N45 G03 X.0188 Y1.8125 I-.0265 J-.0265
N50 G01 X-2.275 F32.
N55 G03 X-2.3375 Y1.75 I0 J-.0625
N60 G01 Y-1.75
N65 G03 X-2.275 Y-1.8125 I.0625 J0
N70 G01 X2.275
N75 G03 X2.3375 Y-1.75 I0 J.0625
N80 G01 Y1.75
N85 G03 X2.275 Y1.8125 I-.0625 J0
N90 G01 X-.0187
N95 G03 X-.0453 Y1.8015 I0 J-.0375
N100 G40 G01 X-.1832 Y1.6636
N105 G00 Z.1
N110 G05 P0
N115 Z1. M09
N120 M05
N125 G00 G91 G30 Z0.
N130 M01

(OPERATION NAME: DRILL1)
(F SCREW MACH DRILL)
( A HAWK RIDGE SYSTEMS POST PROCESSOR )
( -------WWW.HAWKRIDGESYS.COM-------- )
N135 G00 G17 G20 G40 G80 G90 G94
N140 T11 T14 M06
N145 G00 G54 X-2.65 Y2.125 S4000 M03
N150 G43 H11 Z1. M08
N155 G81 G98 R.1 Z-.8032 F12.
N160 Y-2.125
N165 X2.65
N170 Y2.125
N175 G80 Z1. M09
N180 M05
N185 G00 G91 G30 Z0.
N190 G00 G91 G30 X0. Y0.
N195 M30
%